There are many different DIY plumbing hacks you can try before calling a plumber, this will help save money and time. It’s always useful to know the basic DIY hacks to help avoid plumbing disasters. For any plumbing issues that are not an emergency, here is the step by step guide on how to go about the most useful DIY plumbing hacks.

How to unclog a sink

To help unclog a sink you will need two simple ingredients, baking soda and vinegar. These two products are essential for DIY plumbing hacks, everyone’s go to products. This is a plumbing problem that occurs regularly for a lot of people, and can be solved very easily.

Step 1: Firstly pour the baking soda down the drain

Step 2: Pour around half a cup of the vinegar on top of the baking soda

Step 3: Wait around 5 minutes, then go ahead and pour a cup of boiling water down the drain

Step 4: Plunge the sink, then check if the sink is now clear, if it is still not fully clear then repeat the process

How to unclog a toilet

Before calling a plumber you should always try to unclog the toilet yourself, this will help to save you money. The first thing you should try to unclog the toilet is to use a plunger, followed by pouring hot water down it. These steps can work for you if you’re trying to unblock toilet paper and human waste.

See also  The Ultimate Bathroom Organization and Storage Guide [infographic]

Step 1: Firstly you need to turn off the flow of the toilet water, this can be done by the valve or by disconnecting the valve chain

Step 2: Boil some water, then carefully pour this down the toilet

Step 3: If you think this might not be working, then add some hot soapy water instead

Step 4: Then go ahead and use the plunger to unclog

Fixing low water pressure

When you find that you have low water pressure the main cause of this is usually a build up of lime scale, not actually a major plumbing issue. Here are the steps on how to help fix your low water pressure.

Step 1: Remove the showerhead and then remove the spray plate

Step 2: Then soak the spray plate in any descaling solution

Step 3: Put back the spray plate and put back the showerhead

How to fix a leaking pipe under the sink

Many people have to deal with leaking pipes. Although, before you resort to calling a plumber, you should try this hack to help fix your leaking pipe.

Step 1: Turn off your water supply, you can do this at the valve or at the main turn-off valve

Step 2: Place something that can catch the water underneath the pipe connection that’s leaking

Step 3: Then with a monkey wrench loosen the thread located on the pipes, which will then disconnect them

Step 4: Using plumbers tape, tape round the threads, this needs to be done in a clockwise direction

Step 5: Then go ahead and reconnect the pipes

See also  How to choose the right marble for kitchen worktops

If you feel that you might need any new parts to help fix your leaking pipe, Plumb HQ is one the UKs leading online plumbing merchants. With a huge selection of high quality plumbing fittings, at the best prices. They have a helpful team of experts on hand to help you with any questions you might have about needed supplies.